商品目錄
Related

Yamamoto Sound Craft HS-3 wooden boxwood material

Yamamoto Sound Craft HS-3  wooden boxwood material
Views: 1329 品 牌: Yamamoto
型 號: Yamamoto Sound Craft HS-3
庫存狀況: 尚有庫存
0 Product(s) Sold
US$ 95.00
購買數量: 加入購物車

HS-3 is the new style head shell which uses the boxwood material of the quality of the material which was rare and was excellent.


Boxwood material is the very good wood currently used for the comb (comb), the seal, etc. in ancient times.


Although specific gravity is about 0.75 and a grade somewhat heavier than cherry tree material, it is very fine, and is homogeneous and the grain is fineness to the extent that it is not visible with the naked eye.


The African blackwood is excelled in this point.


It has wooden strength, and the strength and elasticity which are not missing even if it gives precise high processing like a comb or a seal.


It was actually used also for the pic (plectrum) of a samisen.


Material decreases and it has become a more rare material than an ebony recently.


I decided to produce commercially, since the good result was obtained when it was used for head shell, since this precious boxwood material was obtained at our company lately.


Although boxwood material is lighter than an ebony, when it carries out from the relation of the weight and strength, it is the feature that strength is large considering the lightness.


Then, in order to finish comparatively lightly, it was considered as the same design as HS-1A.


As a result, result weight became quite light with 8.2g.


Generally, the dynamic sensitivity becomes high, so that the weight in which the tone arm included a cartridge and head shell is light.


I recommend you to use as a lighter oscillating system taking advantage of the lightness in the case of HS-3.


After carrying out a surface treatment to finish of the appearance of HS-3 in clear eco-paints, I displayed the name of article by laser sculpture in the form where it is near with the cloth of a material.


The appearance which the yellow taste cut for a while has peculiar dignity.


A finger hook is a product made from brass of gold plating.


Since the wood itself does not make a peculiar resonance sound, there is also almost no resonance of the finger hook which poses a problem by metal shell.


BT-1 is a set of the screw used when a cartridge is fixed.


The quality of the material is light at a titanium alloy, and is high, and if it is used when fixing a cartridge, its sound quality will improve. [ of strength ]


Since a cartridge picks up unevenness of a record board as a music signal and is reproduced, the influence of the vibration appears greatly.


Although influence on the sound quality of head shell is great, of course, the screw which fixes a cartridge also influences sound greatly.


It seems that it becomes sound soft material had soft sound and hard material had hard sound.


Specific gravity of a titanium alloy is abbreviation halves, such as 4.5 and brass, and since strength is so hard that it is comparable also to steel, it is used for various tools etc. these days.


Since it is used for the diaphragm of a horn driver etc. also in the direction of sound, of course, it can be said that the merit of the sound quality side is large.


It is said that the light and stronger quality of the material of the speed (acoustic velocity) of the sound which generally gets across to a material is earlier.


It is proving that these conditions are excellent in a titanium alloy as a setscrew of a cartridge.


If it is actually used combining HS-3 and BT-1, it will be light and an early sound of a reaction will be obtained.


Please confirm these sound quality improvement effects with your equipment.


In addition, although the gold plating nut made from brass is attached to BT-1 as a nut for fixation, this nut has manufactured and adopted the small type of an outside dimension on the special order.


Therefore, even if it uses it for the cartridge side, the attachment part of almost all cartridges is suited reasonable.


A nut is M2.6 and the opposite neighborhood is 4.0mm.


HS-3 Specifications


material: -- body: -- boxwood material (clear eco-paint finish)


Finger-hook part: Brass (nonmagnetic gold plating finish)


Outside dimension: 18 (W) 50 (L) 18 (H) Except for an attachment part and a finger hook section


Prudence: 8.2g (attachment screw containing a lead is not included)


Accessories: Normalized form 4 color shell lead attachment 3 sorts of product gold plating attachment screw attachment made from brass

尚無評論

發表評論

評論者:


評論內容: 注意: 不支援 HTML 語法

評價: 很差           非常好

請輸入驗證碼: