商品目錄
Related

Kirmuss Audio KA-RC-1 Ultrasonic Vinyl Cleaning System

New Kirmuss Audio KA-RC-1 Ultrasonic Vinyl Cleaning System
Views: 411 型 號: KA-RC-1
庫存狀況: 尚有庫存
0 Product(s) Sold
US$ 1,300.00
購買數量: 加入購物車

RECORD CLEANING

EVERY RECORD IN YOUR COLLECTION SHOULD BE CLEANED BEFORE YOU PLAY IT AGAIN, AND EVERY RECORD ADDED TO YOUR COLLECTION SHOULD BE CLEANED BEFORE PLAYING.  

Every record, even if thought to be cleaned, is soiled with a wide range of dirts and contaminants, including mold and mildew. Vinyl discs are also coated with sticky  compounds.removing pressing debris and 'mold release compound' from sealed LP Contaminants between the groove and diamond styluse cause mistracking and are abrasive resulting in unnecessary, excessive wearing of both record and stylus. By interfering with proper groove tracing, dirty records produce inaccurate, noisy sound.

Resulting in reduced sound quality

Reduction in Stylus Life span

Increaesd  Record wear

Increasing  Static , pops & Clicks

THE ABSOLUTE SOUND: "Most Significant Product Introduction (AXPONA 2018); Kirmuss Audio’s  "In The Groove Ultimate Ultrasonic Vinyl Restoration System",  makes the process of using this technology more affordable.” " Best  Analog Accessory of Show". 

Introducing An Affordable Solution To Maintaining And Restoring Your Vinyl Collection

Dity Records Result in Reduced Sound Quality , Reduction in Stylus Life Span , Increaesd  Record wear &  Static , Pops & Clicks

Clean all your records this is NOT  a expense but a Investment for your music  collection

No matter how you store and use your records they inevitably will require maintenance. When playing records, dust particles and contaminants always build up on the stylus as the tone arm moves across the record. This accumulation on the needle also “dulls” the sound.

The emergence of the dreaded “audible pops” and “crackle sounds” heard are caused by dirt, grime and particles lodged in the record grooves themselves being hit by the needle, as well as static discharges, all amplified by the cartridge. All are annoying.

Even new and latest pressings are subject to the same conditions as your old collection. Their release agents are found on the record from the pressing process and must be removed prior to use, otherwise they attract at an alarming rate dust and other airborne contaminants.

Therefore, recommended is the continual maintenance and care of your records by way of regular cleanings which in turn reduces these unwanted pops and augments therefore one's listening pleasure and audition. Cleaning WILL NOT remove unwanted sounds caused by scratches on the record surface and depending on the age and condition of the record, even repeated cleanings may or may not restore the record to like new condition, but reduces the overall undesirable effect previously described.

Everyone's an expert! There is much nonsense published regarding the cleaning of records. Soaps, chemical mixes and brews, and especially the use of large portions of alcohol etc., these all affect the record negatively either during or after cleaning. Air drying of chemicals that are not physically removed further creates issues that are cumulative over time. Indeed, to the rescue, ultrasonic cleaners have been around for decades and its use and attributes are well known and while care must also be taken as to the introduction of chemicals in the ultrasonic bath, this cleaning technology is a very valuable tool to use. We differ in how we handle the record itself. Nonsense though, are some of the extravagant prices on cleaning machines available as all ultrasonics operate the same way. >>Many add 2.5 L of alcohol to 6 L of water, dangerous!<<<

The KirmussAudio Model KA-RC-1 revolutionizes the way we clean records. First and foremost: a Patented record suspension system assures where records of any speed and size see their grooves cleaned safely. No damage to the record by mechanical intrusion of skewers and the like.

Secondly, only distilled water with a maximum of 45 mL ( 1.5 oz) of ISA 71% solution constitutes the bath and where applied to the record in its second cycle is an anti-bacterial surfactant, pre and post wash neutral liquid agent is used. Ultrasonics need a surfactant to aid in the cavitation of the water solution to better clean and remove contaminants.

RESTORE your 33-1/3, 45's and 78"s. 
CLEAN 2x 33's, 1x 45 and 1x 78 simultaneously!

 

The Editors at THE ABSOLUTE SOUND remarked his product was " Best  Analog Accessory of Show". 

Kirmuss, an audiophile and believer in affordable solutions and technology and holder of 5 Patents in technology and 6 patent applications pending introduced his invention which is priced at several thousands of dollars below other ultrasonic cleaning machines. This innovation makes record restoration available to everyone without a price premium and saw immediate market reaction. 

NOT ALL ULTRASONICS WASH YOUR RECORDS SAFELY: SPECIFY 35 KHz! 

 "Sonically speaking", indeed where higher the frequency, the smaller the bubbles, smaller the bubbles, they enter small crevices easier. 

THE ABSOLUTE SOUND: About our ultrasonic record restoration system:the "Most Significant Product Introduction (AXPONA 2018); Kirmuss Audio’s "In The Groove Ultimate Ultrasonic Vinyl Restoration System", makes the process of using this technology more affordable.”

A RECORD CONTRARY TO BELIEF IS NOT A SMALL CREVICE. MINUTE DETAILS WITHIN THE GROOVE PROVIDE TIMBER AND THE EXCELLENCE OF ANALOG. THESE INDENTATIONS SHOULD NEVER BE REMOVED! 

Records slip in the slot and turn automatically through the ultrasonic bath to completely clean!

 

In 3 years of testing,  35 kHz is  the sweet spot, does not remove these details and does not "smoothen" the grooves as would a poorly designed record cleaner leaving a residue which has the same effect.   Not 45, not 80, not 90 kHz. NEVER 120 kHz or higher. All are proven to damage records over time. Much misinformation out there: We have in house experienced  engineers familiar with ultrasonic generation.  35 kHz is gentle yet powerful to do the job!

A Primer on Sonic Technology:
Under pressure of continuous vibration by the ultrasonic generator at the bottom of the tank bubbles generated rise and stretch and compress at a fast rate. Once they reach a certain size as determined by the frequency and strength of the sound waves produced the bubbles lose structural integrity and collapse violently. When these implosions happen near the surface of an object such as a record,  the bubbles emit high-powered streams of plasma that travel at more than 500 miles per hour and collide with, agitate and remove even very tiny particles and substances from the record's surface.  Using a surfactant attracts further these bubbles to the record. (For new records, 40 mL of 70% alcohol per 6 L of distilled water to remove record pressing residue, our 1% propanol surfactant brushed in for mildly to generally abused records). 

CALLED CAVITATION: 
In an ultrasonic cleaning machine, explosions occur millions of times per second, removing contaminants. Bubble size relates to how much energy is released when they implode.  That’s why a higher frequency produces less intense cleaning, (smaller bubbles) but because a higher frequency yields more bubbles it’s a better choice for cleaning parts with very tiny features such as blind holes, channels and threads. This a danger for vinyl and shellacked records. 
 

SMALL BUBBLES DAMAGE THE DEPTH OF THE GROOVE REMOVING TIMBER AND HIGH FREQUENCIES. THE BEST ULTRASONIC FREQUENCY AFTER 3 YEARS OF TESTING IS 35 kHz WITH A MAX TEMP OF 95 DEG F. 

Before Cleaning

After Cleaning

 

Higher frequencies such as 100, 125, 130 kHz are used for fine cleaning jobs as they enter  small surfaces including microelectronics, printed circuit boards, medical and precision optics. powerful explosions remove post manufacturing matter and dirt. The 35 kHz frequency has a good combination of power, penetration, and especially very even energy distribution and can successfully address most cleaning applications when combined with a properly-engineered cleaning system and also does not damage the stainless steel basin as do higher frequencies. 

MORE MYTHS REVEALED: 
AS TO OTHER SYSTEMS CLEANING 6, 8, 12 OR MORE RECORDS AT A TIME AND UNDERSTANDING 
SYSTEM SELECTION. THE KIRMUSSAUDIO SYSTEM HAS ITS RECORDS SPACED AT THE CORRECT DISTANCE BETWEEN EACH OTHER TAKING ULTRASONIC FREQUENCY, ULTRASONIC POWER TO THE CERAMIC SONIC TRANSDUCERS LOCATED AT THE BOTTOM OF THE STAINLESS STEEL BASIN WITH MEASURED BUBBLE GENERATION AND THE RESULTING CAVITATION EFFECT TAKEN INTO CONSIDERATION. 

KIRMUSS THUS ENGINEERED THEREFORE A SYSTEM WHERE 4 RECORDS ARE  SAFELY AND PROPERLY CLEANED WITH ALL GROOVES CONTACTED WITHOUT WETTING THE LABEL.  OUR SPECIFIC SPACING IS DESIGNED WHERE  A MAXIMUM OF 4 RECORDS ARE CLEANED  SIMULTANEOUSLY  IN A 6 LITTER, 1.6 GALLON TUB. 

ANY MORE RECORDS ADDED IN THE ASSEMBLY WOULD SEE THE RECORDS CLOSER TO EACH OTHER AND AS A RESULT GROOVES NEAREST THE WAX RELEASE POINT AT THE  END OF RECORD WOULD NOT BE CLEANED AS WE SEE IN OTHER SYSTEMS OFFERING 6, 8, EVEN 12 RECORDS BEING CLEANED AT A TIME.  

AS WE HAVE DISCOVERED USING UNDERWATER CAMERAS, THE  HIGHER THE NUMBER OF RECORDS SPACED CLOSER THAN 1 3/4" AND LESS SEES THE SONIC BUBBLE IMPLOSIONS  CANCEL OUT AS BUBBLES RISE  AND APPROACH THE WAX LINE AND AS A RESULT,  WHERE 2/3 OF THE RECORD WOULD NOT BE CLEANED.  It's called SCIENCE!

INTRODUCING AN AFFORDABLE SOLUTION TO MAINTAINING AND RESTORING YOUR VINYL COLLECTION:

No matter how you store and use your records  they inevitably will require maintenance. When playing records, dust particles and contaminants  always build up on the stylus as the tone arm moves across the record. This  accumulation on the needle also “dulls” the sound.  

The emergence of the dreaded “audible pops” and “crackle sounds” heard are caused by dirt, grime and particles lodged in the record grooves themselves being hit by the needle, as well as static discharges, all amplified by the cartridge. All are annoying. 

Even new and latest pressings are subject to the same conditions as your old collection.  Their release agents are found on the record from the pressing process and must be removed prior to use, otherwise they attract at an alarming rate dust and other airborne contaminants. 

Therefore, recommended is the continual  maintenance and care of your records by way of regular cleanings which in turn reduces these unwanted pops and augments therefore one's listening pleasure and audition. Cleaning WILL NOT remove unwanted sounds caused by scratches on the record surface and depending on the age and condition of the record, even repeated cleanings may or may not restore the record to like new condition, but reduces the overall undesirable effect previously described.

EVERY ONE'S AN EXPERT! 
There is much nonsense published regarding the cleaning  of records. Soaps, chemical mixes and brews, and  especially the use of  large portions of alcohol etc., these  all affect the record negatively either during or after cleaning. Air drying or blow drying of chemicals that are not physically removed further creates issues that are cumulative over time. Indeed, to the rescue,  ultrasonic cleaners have been around for decades and its use and attributes are well known and while care must also be taken as to the introduction of chemicals in the ultrasonic bath, this cleaning technology is a very valuable tool to use. We differ in how we handle the record itself. Nonsense though,  are some of the extravagant prices on cleaning machines available as all ultrasonics operate the same way.  >>Many add 2.5 L of alcohol to 6 L of water, dangerous!<<<

The KirmussAudio  Model KA-RC-1 revolutionizes the way we clean records. First and foremost:  a  Patented record suspension system assures where records of any speed and size see their grooves cleaned safely. No damage to the record by mechanical intrusion of skewers and the like.   

Secondly: 
Only distiulled water with a maximum of 40 mL (1.4 oz) of ISA 70% solution constitutes the bath  and where applied to the record in its second cycle is an anti-bacterial surfactant, pre and post wash neutral liquid agent is used by way of a supplied goat hair brush. Ultrasonics need a surfactant to aid in the cavitation of the water solution to better clean and remove contaminants. 

Third: 
Affordability. everyone can enjoy their collection and restore and maintain it.

THE TEAM:  
After 3 years of  extensive  research and trials audiophile and business owner Charles Kirmuss and recognized turntable restoration expert Dr. Eric Watson developed an affordable, simple to use system. With cUl and UL/CE Electrical and Safety Approvals our affordable system will increase your listening pleasure by removing most of those annoying unwanted pops and crackling sounds  from both new and old records. This is not some home-made product. With Patents both issued and pending, ware also sure that You will be very pleased with the results and benefit from many years of satisfaction with our revolutionary ultrasonic based cleaner. 

 

 

There is no filter in the bath or water exchange. When the water becomes dirty, simply drain it and replace it with fresh distilled water. Drainage valve and hose included.

Timer range: 1 min to 15 min +-

Tank material: Stainless steel SUS304

Tank Capacity: 2.0 US Gallons

You can clean at one time: 2 LP's, one 78 and one 45.

There is no dryer, you hand dry. Blotting towels are included!

The Ultrasonic frequency is 35 khz

Outside size (without records inserted): Width 21.5" by High 10.75" by Deep 11.5"

4 RECORD ULTRASONIC VINYL RESTORATION SYSTEM: 220 VAC. COMES WITH: Record washing unit, sonic bath assembly,  AC Power cord.

尚無評論

發表評論

評論者:


評論內容: 注意: 不支援 HTML 語法

評價: 很差           非常好

請輸入驗證碼: