Goldring Legacy

Goldring Legacy
Views: 3433 Brand: Goldring
Product Code: Legacy
Availability: SOLD OUT
0 Product(s) Sold
US$ 1,000.00
Qty: Add to Cart

To ensure a record cartridge reproduces an accurate transcription of the record groove, the cartridge components must be rigidly mounted to the tone arm, whilst simultaneously allowing the tiniest movements of the diamond stylus to be transmitted, via the cantilever, to the sensing coils. The Legacy boasts an ultra low resonance magnesium metal body which is both very light and extremely strong. For convenience and rigidity, it has threaded inserts allowing the cartridge to be easily mounted and accurately aligned into the headshell. The stylus is a very low mass 'Vital' fine line diamond, which is highly polished and gives extremely low distortion. To maintain rigidity, this is attached to a hard alloy cantilever which transfers the maximum level of detail from the diamond to the coils; the latter are hand wound using only the highest purity copper. 

To achieve the optimum compliance required to deliver a smooth, extended frequency response, the stylus damper is formed from a bespoke rubber mixture. Lastly, a precision, rare earth, Neodymium iron boron magnet helps deliver outstanding dynamics


Transducer Characteristics

  • Frequency response: 20 Hz - 22 kHz +/- 3 dB
  • Channel balance: 1 dB max. at 1 kHz
  • Channel separation: 25 dB min. at 1 kHz
  • Sensitivity: 0.25 mV 1 dB @ 1 kHz
  • Static compliance: 16 mm/N 
  • Vertical tracking angle: 20 °
  • Stylus radius: Vital fine line
  • Stylus type: Non-replaceable

Electrical Characteristics

  • Load resistance: 100 Ω
  • Load capacitance: 100 - 1000 pF
  • Internal inductance: 3 uH
  • Internal resistance: 7 Ω

Mechanical Characteristics

  • Cartridge weight: 8 g
  • Fixing centres: 0.5 in (12.7 mm)
  • Playing weight: 1.5 g - 2.0 g (1.75 g nom)
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: